آنالایزر سیگنال شرکت DEWESOFT کشور اسلوونی، با پهنای باند بسیار وسیع قادر خواهد بود داده برداری فوق العاده ای از روند ارتعاشات سیستم شما انجام دهد.
جهت آشنایی با انواع ورودی های آنالایزر سیگنال ، اینجا کلیک کنید.
Analog inputs | 8 ch voltage, IEPE, current (with ext. Shunt) |
ADC type | 16 bit SAR with 100 kHz 5th order analog AAF filter or bypass (500 kHz) |
Sampling rate | Simultaneous 1 MS/s |
Ranges | ±10 V, ±5 V, ±1 V, ±0.2 V |
Typ. SNR @ 100 kHz | 89 dB |
Input coupling | DC or AC (1 Hz) |
Input impedance | 1 MΩ |
IEPE mode | 4 or 8 mA excitation; Sensor detection (Short: <4 V; Open: > 19 V) |
TEDS | Supported in IEPE mode |
Overvoltage protection | 50 V continuous; 200 V peak (10 msec) |
Typical power consumption (max.) | 15 W (22 W) |
Analog inputs | 8 ch voltage, IEPE, current (with ext. Shunt) |
same as SIRIUSi-HS 8xACC, but with additional counters | |
Digital Inputs | 2 counter/6 digital inputs, fully synchronized with analogue data |
Input level compatibility | CMOS, LVTTL |
Input protection | ±25 V continuous |
Digital output | 2 ch open collector, max. 100 mA / 30 Volt |
Typical power consumption (max.) | 15 W (22 W) |
Analog inputs | 8 ch voltage, IEPE, charge, current (with ext. Shunt) |
ADC type | 16 bit SAR with 100 kHz 5th order analog AAF filter or bypass (500 kHz) |
Sampling rate | Simultaneous 1 MS/s |
Ranges | ±10 V, ±5 V, ±1 V, ±0.2 V |
Typ. SNR @ 100 kHz | 89 dB |
Input coupling | DC or AC (1 Hz) |
Input impedance | 1 MΩ |
IEPE mode | 4 or 8 or 12 mA excitation; Sensor detection (Short: <4 V; Open: > 19 V) |
TEDS | Supported in IEPE mode |
Overvoltage protection | 50 V continuous; 200 V peak (10msec) |
Typical power consumption (max.) | 10 W (18 W) |
Analog inputs | 8 ch voltage, IEPE, charge, current (with ext. Shunt) |
same as SIRIUSi-HS 8xCHG, but with additional counters | |
Digital Inputs | 2 counter/6 digital inputs, fully synchronized with analogue data |
Input level compatibility | CMOS, LVTTL |
Input protection | ±25 V continuous |
Digital output | 2 ch open collector, max. 100mA/30Volt |
Typical power consumption (max.) | 10 W (18 W) |
Analog inputs | 8 ch voltage, current (with ext. Shunt) |
ADC type | 16 bit SAR with 100 kHz 5th order analog AAF filter or bypass (2 MHz) |
Sampling rate | Simultaneous 1 MS/s |
Ranges | ±1600 V, ±800 V, ±400 V, ±200 V, ±100 V, ±50 V, ±20 V |
Typ. SNR @ 100 kHz | 85 dB |
Input coupling | DC |
Input impedance | 10 MΩ in parallel 2pF |
Overvoltage protection | In+ to In-: 4 kVpk-pk (1.2 kVRMS), Inx to GND: 2 kVpk-pk (600 VRMS) CAT II 1000V |
Typical power consumption (max.) | 8 W |
Analog inputs | 8 ch voltage, full bridge strain, current (with ext. Shunt) |
ADC type | 16 bit SAR with 100 kHz 5th order analog AAF filter or bypass |
Sampling rate | Simultaneous 1 MS/s |
Ranges | ±100 V, ±10 V, ±1 V, ±100 mV |
Br ranges @ 10 Vexc | 1000 mV/V, 100 mV/V, 10 mV/V |
Input coupling | DC, AC 1 Hz (3 Hz, 10 Hz per SW) |
Input impedance (100 V range) | 10 (1) MΩ between IN+ or In- and GND |
Bridge modes | Full bridge |
TEDS | Standard + MSI adapters, only on DSUB 9 version |
Sensor Excitation | 2 to 30 V bipolar / 0 to 24 V unipolar, sw programmable (16 bit DAC), max 0,2 A / 2 W |
Overvoltage protection | 100 V Range: 300 V; All other Ranges: 100V (250 V peak for 10 msec) |
Typical power consumption (max.) | 10 W (25 W) |
Analog inputs | 8 ch voltage, full bridge strain, current (with ext. Shunt) |
same as SIRIUSi-HS 8xLV, but with additional counters | |
Digital Inputs | 8 counter/24 digital inputs, fully synchronized with analogue data |
Input level compatibility | CMOS, LVTTL |
Input protection | ±25 V continuous |
Digital output | 8 ch open collector, max. 100m A/30 Volt |
Typical power consumption (max.) | 10 W (25 W) |
Analog Inputs | 8 ch voltage, full/half/quarter bridge strain, current (with ext. Shunt), resis- tance, temperature, potentiometer |
ADC type | 16 bit SAR with 100 kHz 5th order analog AAF filter or bypass (1 MHz) |
Sampling rate | Simultaneous 1 MS/s |
Ranges | ±50 V, ±20 V, ±10 V, ±5 V, ±2 V, ±1 V, ±0.4 V, ±0.2 V, ±0.1 V, ±0.04 V, ±0.02 V |
Br ranges @ 10 Vexc | 500 mV/V to 2 mV/V in 8 ranges |
Dynamic Range@10kS | 87 dB |
Input coupling | DC, AC 1 Hz (3 Hz, 10 Hz per SW) |
Input impedance | Range <10 V: >1 GΩ / Range >=10 V: 1 MΩ between IN+ and IN- |
Bridge modes | Full/Half/Quarter Br 120/350Ω 3-wire or 4-wire; internal bridge completion |
Internal shunt resistor | 59.88 kΩ and 175 kΩ, bipolar to Exc+ or Exc- (others on request) |
TEDS | Supported; MSI adapters only fit on 9pin DSUB |
Excitation voltage | 0, 1, 2.5, 5, 10, 15 and 20 VDC software programmable (16 Bit DAC) |
Excitation current | 0.1, 1, 2, 5, 10, 20 and 60 mA software programmable 16 Bit DAC) |
Overvoltage protection | Range <10 V: 50 V (200 Vpeak for 10 msec) / Range >=10 V: 300 V cont. |
Typical power consumption (max.) | 15 W (25 W) |
Analog inputs | 8 ch voltage, full/half/quarter bridge strain, current (with ext. Shunt), resistance, temperature, potentiometer |
same as SIRIUSi-HS 8xSTG, but with additional counters | |
Digital Inputs | 8 counter/24 digital inputs, fully synchronized with analogue data |
Input level compatibility | CMOS, LVTTL |
Input protection | ±25 V continuous |
Digital output | 8 ch open collector, max. 100 mA/30 Volt |
Typical power consumption (max.) | 15 W (25 W) |